Dual Operator Ironworkers

PII-88 | PII-140 | Compare

Piranha Single Operator Ironworkers are capable of performing most applications. However, when two simultaneous operations are required (e.g. punching and notching), a dual operator ironworker fits the bill.

All Dual Operator Ironworkers have:

• Large, open punch station—allows unlimited range of optional equipment and special tooling

• Longer strokes/deeper throat depths

• Large platen—for options and special tooling applications

• Long bending capability—optional bending attachments up to 48"

• 10 punch and die sets appropriate to machine tonnage

• One chip bucket

• Automatic 3-position Urethane Hold-Down on Plate, Angle and Bar Shear Stations

• Dual Operator Controls—punch station and shear/coper station. Each station has both a foot pedal and joystick

• Front and Rear Three-Position Electric Joystick Controls

• Set of Plate Shear Knives (4-way)

• Set of Angle Shear Knives (8-way top/4-way bottom)

• Set of Coper Knives (2-way top/4-way bottom)

• Set of Three Coper Table Guides

Available Attachments

Pipe/Tube Notching Attachment | Channel Die Block | Bending Backgauge
Bending Attachments | 28XX Punch Attachment | Press Brake Tooling Holders
Quickset Gauging Tables | Channel Shear | Bar Bender | Mechanical Backgauge
Electrical Backgauge | Roller Feed Tables