 |
|
The Piranha
Models PII-110 and PII-140 have dual-operator
electric controls (foot pedal and joystick) for
the punch stations and shear/coper stations. Also
featured are Automatic Urethane Hold Downs on the
Angle, Plate and Bar Shears. The large, open punch
stations allow the use of a virtually unlimited
range of standard accessories and special tooling.
STANDARD FEATURES:
- Complete Punching
Attachment with stripper
- 10 Punch and
Die sets
- Automatic Urethane
Hold Down on the Plate,
Angle, and Bar Shear
- Front and rear 2 position
joy stick controls (electric)
- Front and rear Remote
Electric Foot Switches
- Front limit switch
stroke control
- Set of Round Bar Knives
[2 way] (customers choice
to 2")
- Set of 14.5" Plate
Shear Knives [4 way]:
For PII-110
- Set of 16.625" Plate
Shear Knives [4 way]:
For PII-140
- Set of 20.5" Plate
Shear Knives [4 way]
instead of Round Bar
Knives and 16.625" Plate
Shear
- Knives: For PII-140
- Extra Blank Knife
to extend shear to 18" on
PII-110 or 20.5" on
PII-140
- Set of Coper Knives
[2 way top] [4 way bottom]
- Set of Angle Shear
Knives [2 way top] [4
way bottom]
- Chip Buckets (coper
end)
- Extra Oil Filter
- Coupling Wrench
- Intergral Lifting
Lug for instant portability
|
|
| CAPACITIES & SPECIFICATIONS:
MODEL PII-110 110 TON |
| Throat Depth |
20.5" |
Open Height |
14" |
| Closed Height w/o Die
Block |
7-3/4" |
Work Stations From Floor |
44" |
Hydraulics:
Pump GPM
System R/V PSI |
12.5
3700 |
Stroke Length |
7" |
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.) |
1/2" to 2"
1/2" to 1-3/8" |
Motor STD. 230/460 1800
rpm
Opt. Phase and Voltage
On Request |
15 HP 3 Phase |
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W) |
110 Tons
1-7/16" thru 1"
*5-1/4"
16" x 36" |
Coper-Notcher (Tons)
(Mat.) |
75
3-1/2" x 5" x 3/8" |
Dimensions
(NET) W-L-H |
38 "x112"x85" |
Plate Shear |
18" Long
1" x 12"
3/4" x 18" |
| Bending Attachment (optional) |
18", 24", 36", or 48" |
Weight (NET) lbs |
10,000 |
| Strokes Per Minute (Approx.) |
25 @ 1" |
Angle Shear (Max.) |
5" x 5" x 1/2" |
To request information on this machine, contact us at info@piranhafab.com.
| |
 |
|
Ironworkers
Single P40
Single P50
Single P70
Single P90
Dual PII-35
Dual PII-65
Dual PII-88
Dual PII-110
Dual PII-140
Options
Tooling
Ironworker Specs (pdf)
|
|
