IRONWORKERS





The Piranha Model PII-35 is a complete 5-station fabrication center with dual-slide controls for the punch station and shear/coper stations. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling.

STANDARD FEATURES:

  • Complete Punching Attachment with stripper
  • Electric Punch End Control including Remote Foot Switch & Limit Switch
  • Manual Shear and Coper Control
  • Set of Round Bar Knives [2 way] (customers choice to 1-3/8")
  • Set of 10" Plate Shear Knives [4 way]
  • Set of 13" Plate Shear Knives [4 way] (instead of Round Bar Knives and 10" Plate Shear Knives)
  • Set of Angle Shear Knives [8 way top] [4 way bottom]
  • Extra Oil Filter
  • Coupling Wrench & 3/8" Allen Wrench
  • Intergral Lifting Lug for instant portability
CAPACITIES & SPECIFICATIONS: MODEL PII-35 35 TON
Throat Depth 7" Open Height 10"
Closed Height w/o Die Block 7-1/4" Work Stations From Floor 40"
Hydraulics:
Pump GPM
System R/V PSI
4.4
3500		 Stroke Length 4-1/4"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)		 Optional
1/4" to 1-3/8"
1/2" to 1"		 Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request		 5 HP 3 Phase
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)		 35 Tons
13/16" thru 1/2"
*3-1/2" thru 1/8"
11" x 21-1/4"		 Coper-Notcher (Tons)
(Mat.)		 40
2-14" x 3" x 1/4"
Dimensions
(NET) W-L-H


23"x62"x63"

 Plate Shear 13" Long
5/8" x 6"
1/2" x 8"
1/4" x 13"
Bending Attachment 35 Tons Weight (NET) lbs 2600
Strokes Per Minute 28 @ 1" Angle Shear (Max.) 3-1/2" x 3-1/2" x 5/16"
To request information on this machine, contact us at info@piranhafab.com.
Ironworkers


Single P40

Single P50

Single P70

Single P90

Dual PII-35

Dual PII-65

Dual PII-88

Dual PII-110

Dual PII-140

Options

Tooling

Ironworker Specs (pdf)