IRONWORKERS The Piranha Model PII-88 has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling, in addition to a 24" plate shear capacity. STANDARD FEATURES: Complete Punching Attachment with stripper 10 Punch and Die sets Front and rear 2 position joy stick controls (electric) Front and rear Remote Electric Foot Switches Front limit switch stroke control Set of Round Bar Knives [2 way] (customers choice to 1-1/2") Set of 20.625" Plate Shear Knives [4 way] Set of Blank Knives to extend shear to 24" Set of Coper Knives [2 way top] [4 way bottom] Set of Angle Shear Knives [8 way top] [4 way bottom] Chip Buckets (coper end) Extra Oil Filter Coupling Wrench Intergral Lifting Lug for instant portability CAPACITIES & SPECIFICATIONS: MODEL PII-88 88 TON Throat Depth 9" Open Height 14" Closed Height w/o Die Block 7-3/4" Work Stations From Floor 41" Hydraulics: Pump GPM System R/V PSI 7.5 3500 Stroke Length 7" Bar Shear: Round(Min. to Max.) Square (Min. to Max.) 1/4" to 1-1/2" 1/2 " to 1" Motor STD. 230/460 1800 rpm Opt. Phase and Voltage On Request 10 HP 3 Phase Punch: Max. Material Max. Hole *Special Tool Platen Table Size (D-W) 88 Tons 1-1/16" thru 1" *5" thru 3/16" 11" x 38" Coper-Notcher (Tons) (Mat.) 56 2-3/4" x 4" x 1/4" Dimensions (NET) W-L-H 38 "x90"x72" Plate Shear 24" Long 3/4" x 8" 5/8" x 12" 1/4" x 24" Bending Attachment (optional) 18", 24", 36", or 48" Weight (NET) lbs 4700 Strokes Per Minute 19 @ 1" Angle Shear (Max.) w/Special Blade 5" x 5" x 3/8" 4" x 4" x 1/2" To request information on this machine, contact us at info@piranhafab.com. Ironworkers Single P40 Single P50 Single P70 Single P90 Dual PII-35 Dual PII-65 Dual PII-88 Dual PII-110 Dual PII-140 Options Tooling Ironworker Specs (pdf)